Furuno FELCOM500 Postal Equipment User Manual


 
6. WEB FUNCTIONS
6-18
Group setting screen (User)
Click user on the group setting screen to show the User setting screen. Enter IP
address of handset and PC to enable data connection. If no IP address is entered, “D:
No permission” appears on the standby display of the handset and “Data connection
No permission” appears on the main display of the web software.
Entry screen/Edit screen
Item Description
Delete button Delete checked [9] item. During PS, item is deleted
after completion of PS.
Add user button Add user to group (maximum 20). Entry screen
appears.
IP address Show IP address of registered user.
Edit button Change user IP address. The edit screen appears.
Item Description
Group Display group name.
User Enter, change IP address (127.0.0.1, 255.255.255.255; must be different
from IP address of communication unit).
Note: if the IP addresses are the same, only one group can be regis-
tered. “192.161.1.” and “192.168.1.10” can be registered. * is a wildcard:
show network. If you registered two groups this way, the group having
the narrowest range (192.168.1.10) has priority.
Add button Register the information set. The group setting screen appears.
Save button Save the information. The group setting screen appears. Duriing,
change is refelected the connection is reestablished.
Cancel
button
Return to the group setting screen
User list
No. of entries/No. of entries available
VPN pass-through
Entry screen Edit screen