Furuno FELCOM500 Postal Equipment User Manual


 
6. WEB FUNCTIONS
6-25
6.1.6 How to change the SMS password
Do the following procedure to change the SMS password. Make sure to write down
and not forget the password. If the password is lost, contact the dealer or retail suppli-
er. If this occurs, FELCOM 250/500 must be reset to factory settings (refer to section
7.7.2).
1. Click [Settings] in the menu bar.
2. Click [SMS server setting]. The following SMS server setting screen appears.
3. Enter the current SMS password in the [Current password] field. Characters are
displayed as black circles.
4. Enter the new password in the [New password] field (Maximum 8 characters).
5. Enter the new password again in the [Confirm new password] field.
6. Click the [Apply] button. The message "Setting completed" appears.
Note: The following error messages can occur:
Current Password isn’t correct: The current password was entered incorrectly.
New Password isn’t corresponding: The [New password] and [Confirm new
password] fields are not the same.
7. Click the [OK] button.