Furuno FELCOM500 Postal Equipment User Manual


 
2. HANDSET OPERATIONS
2-2
2. Press the key or press the Enter key to send the call. The indication shown
below appears on the screen.
Note: If connection fails, the message "Can’t connect" appears.
3. Complete the conversation.
During conversation, the duration of the communication time is counted and dis-
played on screen (in seconds).
4. Press the key or replace the handset in the cradle to end the call. The dura-
tion of the call is indicated in the display for three seconds and the idle screen ap-
pears.
Note: To make a telephone call from land to the Inmarsat Terminal FELCOM 250/500,
dial the identification code of the telephone carrier, [870] (ocean area code) then the
Inmarsat number.
Service Charge Selection Method
Display on
idle screen
4kbps AMBE+2
(Standard quality)
Low cost [1][*] + subscriber number Voice
3.1kHz Audio (High
quality)
High cost [2][*] + subscriber number Fax
XXXXXXXXXXXXXX
Connection time
XXXXXX
XXXXXX