Honeywell 7800 Tablet User Manual


 
3 - 9
Memory Card Socket and SIM Card Socket
The memory card socket and Subscriber Identity Module (SIM) socket are located under the
main battery in the battery well. The memory card socket provides the user with the option to
expand the terminal’s memory capacity using microSD™ or microSDHC™ memory interfaces.
An industrial grade microSD memory card is included and pre-installed in your Dolphin 7800
Android device. Honeywell recommends the use of industrial grade microSD or microSDHC
memory cards with Dolphin terminals for maximum performance and durability. Contact a
Honeywell sales representative for additional information on qualified memory card options.
Note: Applications on your 7800 Android terminal utilize the microSD card to store files and application
data. To avoid errors or possible data loss, do not operate the device without a memory card
installed.
The memory card socket and Subscriber Identity Module (SIM) socket are located under the
main battery in the battery well. When the protective SIM/memory card cover and battery pack
are properly installed, the cards are sealed against moisture and particle intrusion, read/write
data is stored securely, and the terminal’s environmental rating is preserved; see Installing a
SIM Card and/or Replacing the Memory Card on page 3-15.
Rear Speaker
The integrated rear speaker sounds audio signals as you scan bar code labels and enter data.
The integrated speaker also supports playback of wave and MP3 files, software mixer, and
Speakerphone for WWAN/GSM audio. The operating frequency range is 600-3000Hz at
>90dB.
Stylus/Stylus Slot
The stylus is used to operate the touch panel. The back panel of the terminal features a storage
slot to hold the stylus when not in use. The stylus features a special tip for added accuracy and
ease of use.