Filter
Top Products
4 - 5
Automatic Scanning
Enable Automatic scanning mode to activate the imager for continuous scanning without requiring the
operator to press the Scan button or SCAN key for each bar code presented in the imager's field of view.
To configure the time interval between scan attempts, see Auto Scan Delay under Configuring the Scan
Demo Application (page 4-6).
1. Slide the Automatic blue button to the ON position to enable the feature.
2. Tap the button or press the SCAN key to activate the imaging engine and start
scanning.
3. The imager automatically scans and decodes bar codes presented in the terminal’s field of view.
4. Tap the button or press the SCAN key to stop scanning and deactivate the imager.
5. Slide the Automatic blue button to the OFF position to disable the feature.
Continuous Scanning
Enable Continuous scanning mode to activate the imager for continuous scanning only when the oper-
ator taps and holds the Scan button or presses and holds the SCAN Key. The time interval between scan
attempts is minimal and not configurable.
1. Slide the Continuous blue button to the ON position to enable the feature.
2. Tap and hold the button or press and hold the SCAN key to activate the imaging engine
and start scanning.
3. The imager scans and decodes bar codes presented in the terminal’s field of view.
4. Release the button or SCAN key to stop scanning and deactivate the imager.
5. Slide the Continuous blue button to the OFF position to disable the feature.