Filter
Top Products
Configuring the IN-tact 1101 Configuration Procedure
14 Hypercom Corporation
Password guidelines:
• There is one default user name (admin) and it cannot be changed
• The new password cannot be the same as the default
• The password can be changed whenever necessary on the System Setup - Security screen
• There is no password expiration period; the password you set remains valid until it is changed
• A minimum of eight characters are required, maximum of 32 characters
• Mixed case (upper and lowercase) is permitted
To change the password:
1. Type the current password in the Old Password field. For security purposes, your entry will
appear as a series of asterisks.
2. Type the new password in the New Password field. It must be a minimum of eight characters.
3. Type the new password again in the Retype New Password field to confirm.
4. Click Apply to continue. The IN-tact 1101 Overview screen appears.
At this point, you can use the navigation tree on the left side of the screen to go to any of the
configuration screens. Each screen and the entries you should make are explained in the
following pages.