Filter
Top Products
IN-tact 1101 Software Configuration Guide 29
Configuration Screens Configuring the IN-tact 1101
NOTE: Click Advanced, Save and Continue or Apply and Restart as appropriate. Keep in mind that
your changes are not written to persistent memory until you click Apply and Restart. Any
changes made on this screen are temporarily saved when you click Advanced to access the
second screen. You must still use Apply and Restart in order to write the changes to persistent
memory.
Authentication Methods Allowed Click the CHAP and PAP checkboxes as necessary to match the
authentication being used with this host processor. Both are enabled
by default.
User Name/Password If authentication is being used, enter both the User Name and
Password to be transmitted in the appropriate fields.
Retype Password Type the password again in the Retype Password field to confirm the
password.
Enable Alternate Dial Click this checkbox to enable an alternate dial string. The IN-tact 1101
will automatically attempt to contact this host processor if the primary
modem connection is busy or unanswered.
Alternate AT Dial String Enter any commands and the phone number to dial in order for the
modem to establish contact with the alternate host processor. Up to
32 characters are allowed in this field. This string must begin with
ATDT (or ATDP for pulse dialing).
Field/Button Description