Filter
Top Products
Configuring the IN-tact 1101 Configuration Screens
38 Hypercom Corporation
Permanent Mode Settings
(Used when configuring connections requiring a permanent connection mode)
On the navigation tree, click IN-tact Setup > Application Setup > Host Port. Click Edit, then
select a permanent connection type. Click Edit again.
This screen provides an option for how transaction headers are handled for permanent
connection types. The Hypercom POS LAN Header and TPDU are required for permanent
connections. The only option is whether or not the length field should be included as part of the
length calculation. Contact the host processor to obtain the correct settings for this option if
unknown.
Click Back, Save and Continue or Apply and Restart as appropriate. Keep in mind that your
changes are not written to persistent memory until you click Apply and Restart. Any changes
made on this screen are temporarily saved when you click Edit to access the next screen. You
must still use Apply and Restart in order to write the changes to persistent memory.
Field/Button Description
NII This is the NII routing code entered for this processor on the Host Port
Settings screen. It is provided as a reminder of which processor you
are currently working with.
Description This is the description (or name) entered for this processor on the
Host Port Settings screen. It is provided as a reminder of which
processor you are currently working with.
Include Length Field in Length
Calculation
The first two bytes of the POS LAN header are a length indicator. This
option determines whether or not these first two bytes are included as
part of the length calculation. This option should be set to match host
processor configuration.