Filter
Top Products
Configuring the IN-tact 1101 Configuration Screens
26 Hypercom Corporation
SNMP Interface Settings Screen
On the navigation tree, click IN-tact Setup > System Setup > SNMP Interface. The SNMP
Interface Settings screen appears:
SNMP management of the IN-tact 1101 is optional. The device is capable of hosting two
separate SNMP sessions. Use this screen to configure the IP address for each of the sessions.
Trap forwarding is optional and can be used independently of SNMP management.
Click Save and Continue or Apply and Restart as appropriate. Keep in mind that your changes
are not written to persistent memory until you click Apply and Restart.
Field/Button Description
Enable SNMP Agent Use this checkbox to enable or disable the SNMP agent.
Manager Address 1 Enter the IP address of the first SNMP manager. Set the checkbox to
enable or disable communication with this SNMP manager.
Manager Address 2 Enter the IP address of the second SNMP manager. Set the
checkbox to enable or disable communication with this SNMP
manager.
Trap Destination 1 Enter the first IP address to which the IN-tact 1101 should forward
trap information. Set the checkbox to enable or disable trap
forwarding to this address.
Trap Destination 2 Enter the second IP address to which the IN-tact 1101 should forward
trap information. Set the checkbox to enable or disable trap
forwarding to this address.
Read Only Community Enter the SNMP Read Only community string.
Read Write Community Enter the SNMP Read Write community string.