Filter
Top Products
Terminal Port
60 Hypercom Corporation
Terminal Port
On the navigation tree, click Status > Terminal Port. The Terminal Port Status screen appears:
This screen provides a table that allows you to quickly analyze the status of all enabled terminals
and see response time measurements (RTM). From these, you can determine what your
average (or normal) response time is over a period of time. No configuration is done here; all
terminal configuration is done on the Terminal Port Settings screen. You can click Refresh as
needed to update the status displayed on this screen.
Field/Button Description
Address Terminal’s CU (or polling) address
Description Description assigned in the Terminal Port Settings screen
Status Current status of the terminal, either Active, Idle, or No Response
Msg In Total number of messages received by the IN-tact 1101 from the
terminal
Msg Out Total number of messages sent from the IN-tact 1101 to the terminal
RTM 0-2 Number of total transactions that were processed between zero and
two seconds
RTM 2-4 Number of total transactions that were processed between two and
four seconds
RTM 4-6 Number of total transactions that were processed between four and
six seconds
RTM 6+ Number of total transactions that processing took longer than six
seconds.