Filter
Top Products
IN-tact 1101 Software Configuration Guide 41
Configuration Screens Configuring the IN-tact 1101
HTTP Host Settings Screen
(Used when configuring connections requiring HTTP protocol)
On the navigation tree, click IN-tact Setup > Application Setup > Host Port. Select HTTP
Connection Type and click Edit.
The IN-tact 1101 uses the addressing information entered here to route transactions to the
appropriate destination. Both a primary and alternate IP address or URL can be configured for
each host processing function. Contact the host processor to obtain the correct IP and port
address for routing if unknown.
Field/Button Description
NII This is the NII routing code entered for this processor on the Host Port
Settings screen. It is provided as a reminder of which processor you
are currently working with.
Description This is the description (or name) entered for this processor on the
Host Port Settings screen. It is provided as a reminder of which
processor you are currently working with.
Enable SSL Use this checkbox to enable Secure Socket Layer (SSL) if the host
requires this type of encryption.
Include Two-byte Message
Length Header
Use this checkbox to enable Hypercom's proprietary POS LAN
header if required for this host connection. This option is disabled by
default. The two options below allow further control of the header and
should be enabled or disabled according to how the host processor is
configured.