Filter
Top Products
File Management Functions
48 Hypercom Corporation
Loading a Configuration to the IN-tact 1101
This function allows you to load a configuration file from your local machine to the IN-tact 1101.
This is useful in situations where you may be configuring several units. Rather than having to
configure all of the IN-tact 1101 settings for each unit, you can simply load a previously exported
configuration file that has the correct settings, then make any minor adjustments as necessary.
To load a configuration the IN-tact 1101:
1. From the File Management Functions screen, click Browse (next to the Load Configuration to
IN-tact field).
2. Navigate to and select the configuration file (.cfg extension).
3. Click Open.
4. Click Load to upload the file to the IN-tact 1101.
If an error occurs while loading the file, a message in red appears below the field.
If successful, a message appears while the configuration file is loaded. When finished, the
IN-tact 1101 restarts.
5. Log in to the IN-tact 1101 again.
The old configuration file is saved as a backup configuration and the newly uploaded
configuration file becomes the current configuration for the device.
NOTE: Only the items listed under IN-tact Setup are restored when a previous or imported configuration
is loaded. Passwords and Event Log settings are not imported with a configuration and must be
set on each individual device.
Exporting a Configuration to a PC
This function allows you to save the current configuration stored on the IN-tact 1101 to your local
machine.
To export a configuration to a PC:
1. From the File Management Functions screen, click Export (next to Export Configuration To
PC).
The configuration file is prepared for download.
2. Select a path on your local machine in which to save the file.
3. Click OK.
The file can now be loaded to other IN-tact units as needed and modified, or simply kept as a
backup.
Loading SSL Server Certificates to the IN-tact 1101
This function allows you to upload a new SSL certificate file to the user partition of the IN-tact
1101. Multiple user-imported SSL certificates can be stored and active (up to 16). The SSL
certificates are only used for secure transactions (financial data traffic), not for the web interface
itself. The certificate immediately becomes active; you do not need to restart the device.