Filter
Top Products
IN-tact 1101 Software Configuration Guide 83
Host Processor Setup - Minimal with Multiple Hosts
Figure 5. HTTP Host Settings Screen - Multiple Hosts
The second host processor setup page is used to define connection mode, IP addressing, and
SSL usage:
Field/Button Description
NII The value is carried over from the first configuration screen
Description The text is carried over from the first configuration screen
Enable SSL Enable where encryption and authentication are required to be
performed by the IN-tact device
Include Two-byte Message
Length Header
Use this checkbox to enable Hypercom's proprietary POS LAN
header if required for this host connection. This option is disabled by
default. The two options below allow further control of the header and
should be enabled or disabled according to how the host processor is
configured.
Include Length Field in Length
Calculation
As mentioned above, the first two bytes of the POS LAN header are a
length indicator. This option determines whether or not these first two
bytes are included as part of the length calculation. This option should
be set to match host processor configuration.