Hypercom 1101 Network Router User Manual


 
Transaction Routing - Minimal
86 Hypercom Corporation
Transaction Routing - Minimal
Each IN-tact 1101 should be provisioned with a standard set of routing rules.
The rules determine how transactions will be routed between the terminal and host:
The default NII value is needed to supply a single destination to where all transactions that
cannot be matched to an NII defined in the Host Processor settings should be routed. This
must match one of the configured Host NII values.
The “route to embedded NII” selection provides to the ability to match the NII received from
the terminal to the host destination selected to receive that transaction
The Routing Mode for Unknown NIIs allows a choice as to where to route those transactions
that cannot be routed due to no NII match. They can be routed to the default NII or simply
discarded.
The Send Initialization Requests To selection allows all initialization to be sent to
Term-Master or to a host processor
The Recognize Code 92 and Code 94 As settings should be left at default.