Filter
Top Products
Host Port Status Screen
62 Hypercom Corporation
Error Codes
Status Indicates the current status of the host processor. Valid status
indications are color-coded and described below. Refer to the
following table for the meaning of the most common failure codes.
Active — on demand connection
Active SSL — on demand connection with SSL
Connect — permanent connection
Connect SSL — permanent connection with SSL
Enabled — an idle on demand connection
Failed — see error codes listed below
Inactive — an idle permanent connection or an on demand
connection that isn’t configured.
Interface Indicates the interface (Ethernet or PPP) that can be used to reach
the host processor. If the host processor cannot be reached at all,
“Unknown” is displayed here. When the host address is specified as a
DNS name instead of an IP address, the initial interface appears as
“Unknown”. Once a transaction has been routed to that host and the
DNS server successfully resolves the host name, the interface type is
then correctly shown as “Ethernet” or “PPP”.
Code Description Explanation
100 DNS error The associated host name cannot be found by the
Domain Name Server (DNS). This is because the
DNS is not responding or it cannot find the name.
110 Socket creation error Internal socket creation error. Please refer to the
Event Log for the specific failure.
120 General connection error The session cannot be connected to the host.
Please refer to the Event Log for the specific
reason.
121 Connection refused The session cannot be connected to the host
because the host refused the connection. This
generally means that the host application is not
running or is not configured to use the TCP port.
122 Connection timed out The session cannot be connected to the host
because the host did not respond. This generally
means that the IP address for the host is wrong or
the network is preventing the IN-tact 1101 from
contacting the host.
130 General SSL error The session failed because of an SSL error. Please
refer to the Event Log for the specific reason.
131 SSL certificate validation failed The session failed because the SSL certificate from
the host could not be verified.
132 SSL timeout The session failed because the SSL negotiation did
not complete within the required timeframe.
Field/Button Description