Filter
Top Products
Frequently Asked Questions
1. Use the battery until the charge is completely
depleted (until the battery and power LEDs flash
in unison).
2. Recharge completely before using (the battery is
fully charged when the AC Adapter is plugged in
and the battery LED is green).
3. Repeat these steps three times.
Always use power management features such as
Advanced Power Management (APM), power modes,
standby, suspend, and hibernation.
For more detailed information about power
management features
Online book
How do I load a different operating system on my computer?
–Or–
Where do I get ThinkPad device drivers for this operating
system?
See the online book for information on installing a new
operating system and device drivers. You can get the
ThinkPad device drivers by using the Diskette Factory.
Before installing a new operating system, do the following:
Print the software installation section of the online book.
Make backup diskettes of the device drivers and
applications for your new operating system with the
Diskette Factory. See “Using the Diskette Factory” on
page 148.
Make a DOS system diskette that has the DOS
FDISK.COM and FORMAT.COM utilities and the
CD-ROM device driver for DOS.
How do I use the Recovery CD to reload my factory-installed
ThinkPad operating system and applications?
See “Using the Recovery CD” on page 150.
110
IBM ThinkPad 600 User's Reference
Title: C79EGMST CreationDate: 02/10/98 09:24:42