Filter
Top Products
Troubleshooting Charts
Problem Action
The system cannot start
from the PC Card.
To start from PC Card, do as follows:
1 Start the ThinkPad Configuration program.
2 Click on the UltraBay ( ) button.
3 Remove the check mark from the check box of the Enable Hot/Warm
Swapping of UltraBay.
4 Click on OK.
Make sure that the correct system resources are being used for the PC Card.
ATA: IRQ 15
I/O 170–177h, 376h
Note: Secondary IDE should be disabled.
RPL (Token Ring): IRQ 9
Memory: D6000–DBFFFh
I/O A20–A23h
RPL (Ethernet): IRQ 5
Memory D2000–D7FFFh
I/O 300–31Fh
Chapter 4. Solving Computer Problems 135
Title: C79EGMST CreationDate: 02/10/98 09:24:42