Replacing the UltraslimBay Device
The following table shows what you do if you want to replace the
device in the UltraslimBay or attach the diskette externally:
If the computer power
is on and...
You want to... You need to...
The CD-ROM drive is in
the UltraslimBay
install the diskette drive in the bay enter your computer suspend mode or
power off your computer; then swap
the device.
attach the diskette drive externally power off your computer; then attach
the diskette drive.
The diskette drive is in
the UltraslimBay
install the CD-ROM drive in the bay enter your computer suspend mode or
power off your computer; then swap
the device.
install the CD-ROM drive in the bay
and attach the diskette drive externally
power off your computer; then swap
and attach the devices.
If you install the CD-ROM drive in the UltraslimBay, you can connect
the diskette drive to the external diskette-drive connector and use it
as an external diskette drive.
This procedure describes how to replace the diskette drive with the
CD-ROM drive; follow the same procedure if you install the diskette
drive or weight-saver bezel in the UltraslimBay.
1
Power off the computer, and remove the AC adapter and
cables; then turn the computer upside down.
Chapter 2. Extending the Features of Your Computer 59
Title: C79EGMST CreationDate: 02/10/98 09:24:42