IBM C79EGMST Laptop User Manual


 
Increasing Memory
Increasing Memory
Increasing memory capacity is an effective way to make programs
run faster. You can increase the amount of memory in your
computer by installing a dual inline memory module (DIMM),
available as an option.
Different capacities of DIMM are available. You can install a DIMM
directly in the memory slot on the bottom of the computer. Your
computer memory capacity can be expanded up to 160 MB (32 MB
base memory and two 64 MB DIMM options).
Attention
The ThinkPad 600 computer supports the static dynamic random
access memory (SDRAM) card only. It does not support the
enhanced data output dynamic random access memory (EDO
DRAM) card. If you install a DIMM that is not supported by your
computer, a 225 error code might appear when the system starts.
The appropriate memory option can be purchased through your
IBM reseller or IBM marketing representative.
To install the DIMM, do the following:
1
Power off the computer; then disconnect the AC Adapter
and all cables from the computer.
2
Close the LCD, turn the computer over again and then
remove the battery pack.
Chapter 2. Extending the Features of Your Computer 49
Title: C79EGMST CreationDate: 02/10/98 09:24:42