IBM C79EGMST Laptop User Manual


 
Hints, Tips, and Limitations
For OS/2 Warp:
If you have formatted your drive using high-performance file
system (HPFS) and your system has more than 64 MB memory
installed, hibernation is not supported.
If the COM port does not work even if you have set it up
correctly with the ThinkPad Configuration program, do as
follows:
1.
Open System Setup.
2.
Select Hardware Manager.
3.
Select a folder from the menu.
4.
Select Properties.
5.
In the default pull-down menu, select No Hardware
Detection. If it has already been selected, change the
setting.
6.
Open the ThinkPad Configuration program.
7.
Set the COM port as desired.
8.
Restart the system.
If you receive incoming faxes or mail under OS/2, you must set
the modem settings in the fax application to one of the following:
Hardware FIFO enabled
Hardware Flow Control on
UART 16550A modem
In OS/2 FaxWorks for example, select Utilities, Settings,
Modem Type, and Use HW FIFO (16550A).
If you do not set your modem to one of these settings, you will
not be able to receive an incoming fax or an incoming call in
suspend mode.
For Windows NT:
For Windows NT 4.0, hibernation is not supported if the drive is
formatted by NTFS.
For more information, refer to the following Web site:
http://www.pc.ibm.com/thinkpad
112
IBM ThinkPad 600 User's Reference
Title: C79EGMST CreationDate: 02/10/98 09:24:42