Filter
Top Products
Using a Docking Station
Or:
Turn the security key of the docking station to the eject
position and release the key.
An eject request is made to the operating system. It might
take some time for this eject operation to end.
2
When you hear a beep, turn the security key to the rear
again. Now you can eject your computer from the
docking station.
Note: To see if the eject operation is complete, click on Start again and
see if the Eject PC icon still appears. If the icon still appears, wait
until it disappears.
Note: If the operating system rejects the eject request, a message appears
on the screen. If this happens, try
cold undocking
.
Presetting a Device to Avoid a Resource Conflict
The Windows 95 plug-and-play function enables you to use devices
that you install in the docking station immediately after you power on
your system. If you cannot use them, a system resource conflict
might have occurred. Do the following to resolve the conflict:
For a PCI adapter or an SCSI device:
1
Start the ThinkPad Configuration program and click on
the Docking Station (
) button.
2
Assign at least one IRQ value. The default setting is IRQ
11.
For an ISA adapter card:
1
Open Windows 95 Device Manager and check the
resources available for the new card.
2
Set the jumper or the DIP switches on the adapter card.
80 IBM ThinkPad 600 User's Reference
Title: C79EGMST CreationDate: 02/10/98 09:24:42