Filter
Top Products
Upgrading the Hard Disk Drive
removed easily. To remove or tighten the security
screw, use a 2.5-mm Allen wrench.
3
Pull the strap of the hard disk drive to remove the drive.
4
To install the new hard disk drive, do the following:
a
Insert the new hard disk drive into the bay. Make sure
you connect the drive firmly.
b
Replace the hard disk drive cover, and reinstall the
screw.
c
Turn the computer right-side up, and power it on.
Note: If the hard disk drive that you will be installing has spacer on it,
remove the spacer using something like a small screwdriver.
56 IBM ThinkPad 600 User's Reference
Title: C79EGMST CreationDate: 02/10/98 09:24:42