Filter
Top Products
Fax transmission/Reception methods
6
bizhub 160f 6-3
6 Fax transmission/Reception methods
6.1 Transmission methods
6.1.1 Memory transmission
With memory transmission, the document is scanned, then stored in the
memory for transmission (queued transmission).
Memory transmission is selected as the default transmission mode.
!
Detail
For details on sending faxes through memory transmission, refer to “Ba-
sic Faxing” on page 5-15.
To specify memory TX
1 Press the [Fax] key to enter fax
mode.
2 Load the document into the auto-
matic document feeder.
3 If necessary, change the resolution
setting (p. 5-14).
4 Press the [Memory TX] key.
5 Check that the memory TX lamp
lights up. If the memory TX lamp is
not lit, the direct transmission is se-
lected.