Filter
Top Products
Using the utility mode
7
bizhub 160f 7-19
Selecting the ADMIN. MANAGEMENT menu
1 Press the [Utility] key four times.
ADMIN. MANAGEMENT appears.
2 Press the [Yes] key.
3 From the 10-key pad, press the key
[1] for the ADMIN. MANAGEMENT
function that you wish to set.
The admin. management functions are as follows:
1 REMOTE MONITOR
4 Using the 10-key pad, enter the 6-
digit administrator access number,
and then press the [Yes] key.
2
Note
If, at any time, you wish to quit setting an ADMIN. MANAGEMENT func-
tion, press the [No/C] key. When the message STOP SETTING? appears,
press the [Yes] key to quit.