Filter
Top Products
6
Fax transmission/Reception methods
6-18 bizhub 160f
6.1.9 Polling Transmission
Documents scanned and saved in the memory can be retrieved by the recip-
ient.
2
Note
Polling transmission is compatible with F code transmission.
A maximum of 30 polling transmissions can be programmed.
If the memory is full, polling transmission cannot be set.
With polling transmission, the recipient incurs the cost of the call.
To set up polling transmission
1 Position the document.
2 If necessary, change the resolution setting (p. 5-14).
3 Press the [Function] key.
4 Press the [5] key from the 10-key
pad.
or
Press the [Function] key 5 times to
select POLLING TX, and then press
the [Yes] key.
5 Using the [*] and [)] keys, select ei-
ther SINGLE or MULTI, and then
press the [Yes] key.
– To allow only one polling trans-
mission request, then delete the document from the memory, select
SINGLE.
– To allow multiple polling transmission requests, select MULTI. The
document is stored in the memory until it has been deleted.