Filter
Top Products
Using the utility mode
7
bizhub 160f 7-63
Selecting the RX OPERATION menu
1 Press the [Utility] key eight times.
RX OPERATION appears.
2 From the 10-key pad, press the key
([1] through [9]) for the RX operation
function that you wish to set.
The RX operation functions are as
follows:
1 MEMORY RX MODE
2 NO. of RINGS
3 REDUCTION RX
4 RX PRINT
5 RX MODE
6 FORWARD
7 FOOTER
8 SELECT TRAY
9 CLOSED NETWORK
2
Note
If, at any time, you wish to quit setting/changing an RX operation func-
tion, press the [No/C] key. When the message STOP SETTING? appears,
press the [Yes] key to quit.
To exit the RX OPERATION menu, press the [Panel reset] key. The main
screen appears again.