Using the utility mode
7
bizhub 160f 7-67
Specifying FORWARD
1 Select the FORWARD in the RX OP-
ERATION menu.
For details, refer to page 7-63.
2 Using the [*] and [)] keys, select
ON, ON(PRINT) or OFF, and then
press the [Yes] key.
–If ON or ON(PRINT) was select-
ed, a screen appears, allowing you to specify the forwarding loca-
tion. (Continue with step 4.)
–If OFF was selected, the RX OPERATION menu appears again.
3 Using the one-touch dial keys or the
speed dial numbers, or by entering
the fax number using the 10-key pad,
specify a fax number, and then press
the [Yes] key.
The RX OPERATION menu appears again.
2
Note
An e-mail address can be specified as a forwarding location only when
the optional scanner unit SU-502 is installed.
For details, refer to the user manual for the scanner unit SU-502.