Filter
Top Products
Using the utility mode
7
bizhub 160f 7-43
To change/delete a programmed timer transmission
1 Select the PROGRAM DIAL in the
FAX REGISTRATION menu.
For details, refer to page 7-27.
2 Press the one-touch dial key ([12]
through [15]) programmed with the
timer transmission that you wish to
change or delete.
3 Press the [No/C] key.
4 Using the [*] and [)] keys, select ei-
ther EDIT or DELETE, and then
press the [Yes] key.
–If EDIT was selected, the pro-
grammed transmission time is displayed. (Continue with step 6.)
–If DELETE was selected, the program dialing settings are deleted
and the SELECT REGIST.KEY screen appears again.
5 To change the transmission time,
press the [No/C] key, and then use
the 10-key pad to enter the correct
time. If you do not wish to change the
transmission time, press the [Yes]
key.
The recipient is displayed.
6 To change the recipient, press the
[No/C] key, and then by using the
one-touch dial keys or the speed dial
numbers, or by entering the fax
number using the 10-key pad, speci-
fy a different recipient.
– Change the F codes (SUB and SID) as desired.