Filter
Top Products
3
Before making copies or faxing
3-30 bizhub 160f
Loading paper into tray 1
1 Remove the bypass tray.
2 Load the paper into the tray so that
the front side of the paper (the side
facing up when the package was un-
wrapped) faces up.
3 Slide the paper guides against the
edges of the paper. If legal-size pa-
per is installed, open the door of
tray 1.
4 Attach the bypass tray in its original
position.
!
Detail
If paper with a different size or type is loaded, various settings must be
specified. If the settings are not correctly specified, paper size error may
occur. For details, refer to “Specifying TRAY SETTING” on page 7-16.
When legal-size paper is
installed