Filter
Top Products
7
Using the utility mode
7-58 bizhub 160f
Selecting the TX OPERATION menu
1 Press the [Utility] key seven times.
TX OPERATION appears.
2 From the 10-key pad, press the key
([1] through [4]) for the TX operation
function that you wish to set.
The TX operation functions are as
follows:
1 SCAN CONTRAST
2 RESOLUTION
3 DEFAULT TX
4 HEADER
2
Note
If, at any time, you wish to quit setting a TX operation function, press the
[No/C] key. When the message STOP SETTING? appears, press the
[Yes] key to quit.
Specifying SCAN CONTRAST
1 Select the SCAN CONTRAST in the
TX OPERATION menu.
For details, refer to page 7-58.
2 Using the [*] and [)] keys, select
one of the five settings between
LIGHT and DARK, and then press
the [Yes] key.
The TX OPERATION menu appears again.