Filter
Top Products
Fax transmission/Reception methods
6
bizhub 160f 6-29
6.3.2 Specifying F codes
When sending faxes
F codes can be specified when the 10-key pad is being used to enter the fax
number of a recipient while sending a fax.
1 Using the 10-key pad, enter the fax
number of the recipient.
2 Press the [,] key, and then use the
10-key pad to enter the SUB.
– A number up to 20 digits long can
be entered for the SUB.
– To enter an SID, continue with step 3.
– If an SID will not be entered, continue with step 4.
3 Press the [,] key, and then use the
10-key pad to enter the SID.
– A number up to 20 digits long can
be entered for the SID.
4 Press the [Start] key to begin scanning and sending the fax.
Programming F codes
F codes can be specified when programming one-touch dial keys or speed
dial numbers.
!
Detail
For details, refer to “Fax registration settings” on page 7-26.