Filter
Top Products
3
Before making copies or faxing
3-22 bizhub 160f
Energy save mode
Instead of turning off the machine, it can be set into a standby state (energy
save mode).
If the machine is not used for a set length of time, it will automatically enter
the energy save mode. The default length of time is 15 min.
To cancel the energy save mode, press any key on the control panel.
The length of time before the machine enters the energy save mode can be
set between 1 min and 240 min.
!
Detail
For details, refer to “Specifying ENERGY SAVE MODE” on page 7-8.
Auto print start
If a document is loaded and the [Start] key is pressed during the period after
the machine has been turned on but before it is ready to make print, the ma-
chine will automatically start the print cycle as soon as it completes the
warm-up cycle.
Auto tray switching
If the tray runs out of paper while printing, the machine will automatically
switch to a different paper source and continue printing provided that the
new tray contains paper of the same type and size in the same orientation.
If the optional paper feed cassette is installed, a maximum of 750 pages can
be continuously printed.
Auto tray switching can be disabled.
Tray1 → Tray2 (Paper Feed Unit)
Tray2 (Paper Feed Unit) → Tray1
!
Detail
For details, refer to “Paper source settings” on page 7-13.