Filter
Top Products
Management
11-10
5 The overwrite confirmation screen appears.
Press [Yes] (the Left Select key). The user
information is changed and the screen returns to
Local User List.
Deleting a user
1 Press the U or V key to select the user you want
to delete, and then press [Menu] (the Right Select
key).
2 Press the U or V key to select [Delete] and then
press the OK key.
3 In the delete confirmation screen, press [Yes] (the
Left Select key). The user is deleted and the
screen returns to Local User List.
Enabling/Disabling Group Authentication
This enables group authentication using the LDAP server. This menu can be used only when [Netwk Authentic.]
is selected as the user authentication method. For details of LDAP server settings, refer to the Operation Guide
of the LDAP server.
Use the procedure below to enable group authentication.
NOTE: Refer to Character Entry Method on Appendix-7 for details on entering characters.
NOTE: You can configure detail settings of group authentication in COMMAND CENTER. For details, refer to
the KYOCERA COMMAND CENTER Operation Guide.
1 See the procedure for displaying user control on
page 11-2
, and display the User/Job Account.
2 Press the U or V key to select [User Login Set.].
3 Press the OK key. The User Login Set. menu
appears.
Local User List:
a
b
l
DeviceAdmin
*********************
l
User1
[ Menu ]
l
Admin
Menu:
a
b
1
Detail/Edit
*********************
3
Add User
2
Delete
User Login Set.:
a
b
*********************
2
Local User List
3
Group Auth.
[ Exit ]
1
User Login