Filter
Top Products
2-54 Service Manual
5055-01x
Evenly spaced
marks on the
paper, or a single
mark in the same
place on every
page.
Go to the “Marks on Paper Service Check” on
page 2-66.
Poor fusing. Go to the “920 - Fuser Error - Fuser Heater Trouble”
on page 2-7.
Toner scatter on
front or back of
paper.
Check the following:
• Excessive toner buildup on the transfer belt. Clean off
the toner and run a test print.
• Transfer belt assembly
• Transfer belt toner waste bottle
• Transfer belt separation fingers
• Fuser separation pawl
Paper will not
feed from MPF.
Be sure you have paper in the MPF.
Be sure the MPF paper present sensor connector
(CN11) is connected to the printer controller board. If
the paper still does not feed, go to the “Paper Carrying
Service Check” on page 2-58.
Symptom Action
Service.bk Page 54 Thursday, October 4, 2001 12:20 PM