Filter
Top Products
3-14 Service Manual
5055-01x
If the test fails, the Fail Count increments by one and one of the
following failure messages displays for approximately three seconds:
Sync Busy Error, Byte Interrupt Request Error, Strobe Interrupt
Request Error, Init Fall Error, Init Busy Error, Init Rise Error, Host
Busy Error, RAM Data FF Error, RAM Data AA Error, RAM Data 00
Error, RAM Data 55 Error, DMA Count Error, DMA Address Error,
DMA Interrupt Error, DMA Memory Error, DMA Background Error,
Clear Init Rise Error, False Init Rise Error, False Init Fall Error,
Autofeed Rising Interrupt Error, Clear Autofeed Rise Error, False
Autofeed Rise Error, Autofeed Falling Interrupt Error, Clear Autofeed
Fall Error.
Once the maximum pass count or fail count is reached, the test
stops and the final test results display. Press Return or Stop to exit
the test.
Service.bk Page 14 Thursday, October 4, 2001 12:20 PM