Filter
Top Products
4-30 Service Manual
5055-01x
Transfer Belt Removal
To replace the transfer belt before the Life Warning or Exhausted
messages appear, open the supplies menu on the operator panel
and select Replace Supplies, select Belt, and select Replace Now.
If the 80 Transfer Belt Life Warning or Exhausted message
appears on the display, press Select when the Select = Replace
message appears. The message Preparing for Maintenance
appears on the display, followed by Printer Ready for
Maintenance, then Power Off to Replace Items. If the operator
panel is inoperable or if you have an unrecoverable error code,
perform steps 1 through 4 and then:
• Remove the transfer belt cover.
• Override the front cover interlock switch.
• Turn the printer on.
• Look for the belt to lower during power on sequence.
• Turn the printer off when the belt lowers.
• Turn the printer off and proceed with step 5.
WARNING: Do not turn the printer off until the Power Off to Replace Items
message appears.
1. Turn the printer off along with any optional devices connected to
the printer.
2. Open the front cover and top unit.
WARNING: Do not touch, drop or place anything on the transfer belt.
Touching the surface of the transfer belt or placing items on the belt may
cause damage.
Service.bk Page 30 Thursday, October 4, 2001 12:20 PM