Filter
Top Products
General Information 1-19
5055-01x
Envelope / Postcard Mode
Envelope / postcard mode is used to improve printing quality on thick
paper of small width. In this mode, the fusing temperature is set
higher than usual and transfer voltage is switched according to the
temperature.
Operation Mode
Operation modes such as sleep mode and registration mode are
switched by command from the interface controller.
By carefully selecting print media and loading them properly, you
can avoid most paper jams. If jams do occur, follow the steps
outlined in this section.
To resolve the paper jam messages, you must clear the jammed
area and then press Go to clear the message and resume printing.
The printer prints a new copy of the page that jammed if Jam
Recovery is set to On or Auto; however, the Auto setting does not
guarantee the page will print.
Service.bk Page 19 Thursday, October 4, 2001 12:20 PM