Filter
Top Products
4-24 Service Manual
5055-01x
6. Remove the screw from the OHP detection sensor (upper).
7. Turn the bearing stopper of the multi-purpose feeder roll forward
1/4 turn and remove upward.
8. Remove the C-clip and remove the multi-purpose feeder clutch.
Note: After reassembling the components, coat the contact areas of
the multi-purpose feeder roll shaft and multi-purpose feeder ground
plate with conductive grease. If the paper feed roller surface is
stained by oil or other contaminant, clean with cloth moistened with
alcohol.
Service.bk Page 24 Thursday, October 4, 2001 12:20 PM