Filter
Top Products
Repair Information 4-79
5055-01x
HCPF Paper End Sensor Removal
HCPF Paper Size Sensors (1, 2) Removal
1. Cover the paper level sensor with your hand and press the
down button. The tray moves down. Lower the tray until the
down sensor turns on.
2. Remove the front cover and transfer cover.
3. Remove the two screws on the front and rear sides of the side
fence.
4. Mark the locking position of the side fence locking stay.
5. Remove the two screws on the side fence locking stay.
6. Remove the screw and connector from paper end sensor, and
remove the sensor.
7. Remove the screw and connector from the clamp plane and
remove the paper size sensors 1 and 2.
Service.bk Page 79 Thursday, October 4, 2001 12:20 PM