Filter
Top Products
Diagnostic Aids 3-17
5055-01x
Device Tests
Quick Disk Test
The Quick Disk Test performs a non-destructive read/write on one
block per track on the disk. The following message displays while the
test is running:
The Power indicator blinks while the test is in progress. If the test is
successful, the following message displays.
Press Go, Return, or Stop to return to the DEVICE TESTS screen.
If the test fails, then the following message is displayed.
Press Go, Return, or Stop to return to the DEVICE TESTS screen.
Canceling this test is not allowed.
Quick Disk Test
Testing...
Quick Disk Test
Test Passed...
Quick Disk Test
Test Failed...
Service.bk Page 17 Thursday, October 4, 2001 12:20 PM