Filter
Top Products
Diagnostic Aids 3-19
5055-01x
Flash Test
The Flash Test writes and reads data to the flash device, destroying
all data, leaving the flash unformatted. The servicer must reformat
the flash using the Format Flash menu operation. To run this test,
select Flash Test from the DEVICE TESTS menu. The following
message displays warning the customer that all flash contents will
be lost:
To continue the test, press Go. To exit the test immediately and
return to the DEVICE TESTS screen, press Return or Stop.
The following message displays while the test is running:
The Power indicator blinks while the test is in progress. If the test is
successful, the following message displays:
Press Go, Return, or Stop to return to the DEVICE TESTS screen.
The Power indicator turns on solid. If the test fails, the following
message displays.
Press Go, Return, or Stop to return to the DEVICE TESTS screen.
Files Will be
Lost Go/Stop?
Flash Test
Testing
Flash Test
Test Passed
Flash Test
Test Failed
Service.bk Page 19 Thursday, October 4, 2001 12:20 PM