Filter
Top Products
2-38 Service Manual
5055-01x
56 Parallel Port
<x> Disabled
56 Std Parallel
Port Disabled
Data has been sent to the
printer through a disabled
parallel port.
• Press Go to clear the
message.
• Make sure the Parallel
Buffer menu item in the
Parallel Menu is set to
Disabled.
56 USB Port
<x> Disabled
56 Std USB
Port Disabled
Data has been sent to the
printer through a disabled
USB port.
• Press Go to clear the
message.
• Make sure the USB
Buffer menu item in the
USB Menu is set to
Disabled.
58 Too Many
Bins Attached
Too many output bins are
installed.
Unsupported output bins are
installed.
Turn off and unplug the
printer. Remove or
reconfigure the output
bins. Plug the printer in
and turn it on.
58 Too Many
Disks Installed
Too many disks are installed. Turn off and unplug the
printer. Remove the excess
hard disks. Plug the printer
in and turn it on.
58 Too Many
Flash Options
Too many flash options are
installed.
Turn off and unplug the
printer. Remove the excess
flash options. Plug the
printer in and turn it on.
58 Too Many
Trays Attached
Too many trays are installed. Turn off and unplug the
printer. Remove the excess
trays. Plug the printer in
and turn it on.
61 Defective
Disk
The printer detects a
defective hard disk.
• Press Go to clear the
message and continue
printing.
• Install a different hard
disk before you perform
any operations that
require one.
Message Meaning Action
Service.bk Page 38 Thursday, October 4, 2001 12:20 PM