Filter
Top Products
General Information 1-27
5055-01x
Tray Up/Down Mechanism
The driving force of the tray motor transmits to the tray driving pulley
through the gears. Moving the tray moves up and down through the
tray driving belt. After the paper loads, and the top cover is set, the
pickup solenoid turns on to lower the call roller. When the tray moves
up, the call roller is raised by the top surface of the paper, and the
shield plate on the up sensor is released from the up sensor which
turns off the tray motor.
Also, when the top surface of the paper lowers during printing and
the up sensor is shielded, the tray motor again rotates forward to
raise the paper.
Service.bk Page 27 Thursday, October 4, 2001 12:20 PM