Filter
Top Products
1-22 Service Manual
5055-01x
Removing Small Size Paper From the Duplex Unit
When printing on both sides of A5 or other small size paper, you
may need to partially remove the duplex unit to clear the jam.
1. Turn off the printer.
2. Open the duplex unit door.
3. Loosen the two screws.
4. Pull out the duplex unit far enough to see the duplex unit inlet.
5. Remove jam from the duplex unit inlet.
6. Slide the duplex unit in.
7. Align the thumbscrews on the duplex unit with the holes in the
printer.
8. Tighten the thumbscrews to secure the duplex unit.
9. Close the duplex unit door.
Check Area E
This message indicates a jam in the top, middle, or bottom optional
drawer paper path area. If you have a high capacity feeder, pull the
feeder away from the printer.
1. Open the jam access door on the top optional drawer.
2. Remove the jam.
3. Close the jam access door.
4. Open the jam access door on the middle optional drawer.
5. Remove the jam.
6. Close the jam access door.
7. Open the jam access door on the bottom optional drawer.
8. Remove the jam.
9. Close the jam access door.
10. Press Go.
Note: If the paper jam message continues, check and clear all
paper from the paper path.
Service.bk Page 22 Thursday, October 4, 2001 12:20 PM