Filter
Top Products
2-32 Service Manual
5055-01x
Ready Hex The printer is in Hex Trace
mode and is ready to receive
and process print jobs
• Send a job to print. All
data is printed in
hexadecimal. Control
strings are printed, not
executed.
• Turn the printer off and
then on to exit Hex Trace
mode.
Remove Paper
<specified bin>
The specified output bin is
full.
Remove the paper from
the specified bin(s).
Resetting Maint
Cnt Value
The printer is resetting the
counter that tracks wear on
the fuser.
Wait for the message to
clear.
Resetting the
Printer
The printer is resetting to the
current default settings. Any
active print jobs are canceled.
Wait for the message to
clear.
Restore Held
Jobs. Go/Stop?
The printer has been reset or
has been turned on and the
printer detects print and hold
jobs stored on the hard disk.
Press Go. All jobs on hard
disk are restored.
Press Return or Stop. No
jobs are restored and the
printer returns to Ready.
Restoring
Factory
Defaults
The printer is restoring factory
default settings.
Wait for the message to
clear.
Restoring Held
Jobs
The printer is restoring held
jobs from the hard disk.
Wait for the message to
clear.
Serial <x> A serial interface is the active
communication link.
Wait for the message to
clear.
Std Bin Full The standard bin is full. Remove the paper in the
bin to clear the message.
Supplies One of the printer supplies
requires attention.
Press Menu to open the
Supplies Menu and identify
which supply item needs
replacing.
Message Meaning Action
Service.bk Page 32 Thursday, October 4, 2001 12:20 PM