Filter
Top Products
3-16 Service Manual
4085-001
Invoking Reset Printer (from the Ready message)
1. Press Menu> or Menu< to enter the menus. The following
screen is displayed.
2. Press Menu> or Menu< until JOB MENU is displayed on the
second line. Press Select. The following screen is displayed.
3. Press Select. The printer automatically exits the operator panel
menus and performs the reset operation. As the operation is
performed, the Resetting the Printer message appears.
Invoking Reset Printer (from Hex Trace mode, and all other
messages)
1. Press Menu> or Menu< to enter the menus. Since the JOB
MENU is the only menu active, the printer automatically selects
it and displays the following screen.
2. Press Select. The printer automatically exits the operator panel
menus and performs the reset operation. As the operation is
performed, the Resetting the Printer message appears.
Note: The system administrator can disable the Reset Printer
function by turning the Reset Control setting off. Reset Printer is not
displayed when Reset Control is set to off.
SUPPLIES MENU
JOB MENU
Reset Printer
JOB MENU
Reset Printer