Filter
Top Products
Repair Information 4-33
4085-001
PerfectFinish Motor Removal
1. Remove the rear cover. Refer to “Rear Cover Removal” on
page 4-3.
2. Disconnect the PerfectFinish motor and encoder connector (J5)
from the engine board.
3. Remove the two screws {A} from the motor.
4. Remove the motor. Note routing of wiring.
Index Motor Assembly Removal
1. Remove rear cover. Refer to “Rear Cover Removal” on
page 4-3.
2. Remove engine board cover. Refer to “Tray 2 Covers Removal”
on page 4-49.
3. Disconnect (J16) from the engine board.
4. Remove the encoder disk feed roller assembly. Refer to
“Encoder Disk Feed Roller Assembly Removal” on page 4-34.
5. Remove the two screws from the index motor.
6. Remove the motor. Note the routing of the wiring.