Filter
Top Products
Diagnostic Aids 3-37
4085-001
To reset the maintenance page counter, the user selects “Reset
Maint Cnt.” Pressing Select causes the maintenance page counter
to be reset back to zero. The following screen is displayed
momentarily to indicate the counter is changing.
When the reset operation is complete, the printer returns to the
“PRINTER SETUP Reset Maint Cnt” screen.
Diagnostics (Mode 2) - Error Log
Viewing the Error Log
The Error Log aids the Customer Engineer by providing a history of
printer errors. It contains the 12 most recent errors. The most recent
error is displayed in position 1, and the oldest error is displayed in
position 12 (assuming 12 or more errors have occurred). If fewer
than 12 errors have occurred, then the oldest error is displayed in
the position before the empty log entries begin. Empty log entries
are identified with an error number of 000. Occupied log entries
contain the error number for the message that is displayed on the
operator panel. For example, 925 is contained in the log when a 925
Service Error occurs.
If an error occurs after the log is full, the oldest error in the log is
discarded to make room for the new error. The printer stores
identical errors in consecutive positions in the log. In other words,
error log position N and position N+1 could contain the same error
code if the same error occurs twice in a row.
The following error messages are stored in the error log.
• All 2xx paper jam messages
• All 9xx service messages
To view the error log, select the Display Log operation from the
Diagnostics ERROR LOG menu. The entire error log cannot be
displayed on a single screen. Four error log entries are displayed per
screen. Therefore, the entire error log takes up 3 screens. To move
Reset Maint Cnt
SAVED