Filter
Top Products
Repair Information 4-43
4085-001
Left Index Frame Pivot Assembly Removal
1. Remove all covers.
2. Remove the carrier and belt. Refer to “Engine Board /Cover
Removal” on page 4-14.
3. Remove the pump housing, maintenance station, tank, and
transport carrier motor. Refer to “Pump Housing/Maintenance
Station/Ink Waste Tank/Transport Carrier Motor Removal” on
page 4-20.
4. Remove the star wheel shaft. Refer to “Star Wheel Shaft
Assembly Removal” on page 4-36.
5. Remove paper feed platen. Refer to “Paper Feed Platen
Assembly Removal” on page 4-38.
6. Remove encoder disk feed roller assembly. See “Encoder Disk
Feed Roller Assembly Removal” on page 4-34.
7. Remove the frame from the base. Refer to “Frame From Base
Removal” on page 4-27.
8. Disconnect all cable connectors from the engine board.
9. Remove paper feed frame and motor. Refer to “Paper Feed
Frame and Motor/Cam Shaft Assembly Removal” on page 4-40.
10. Remove the index motor. Refer to “Index Motor Assembly
Removal” on page 4-33.
11. Remove the two index frame springs {A}.
12. Remove the three screws {B} from the left index frame pivot
assembly.
13. Remove the left index frame pivot assembly.