Filter
Top Products
3-36 Service Manual
4085-001
The left-most digit (‘1’ in this example) blinks, indicating it is the first
digit to be changed. To change the value, press either Menu> or
Menu< until the value you want is displayed. Press Select to move
to the next digit. The next digit (‘2’ in this example) blinks. Continue
modifying each digit using this method. To skip a digit (that is, and
keep its current value), press Select.
When Select is pressed after the final digit (‘7’ in this example), the
new page count is stored in NVRAM.
Viewing the Permanent Page Count
The permanent page count setting cannot be modified using the
operator panel. It can only be viewed using the Diagnostics menus.
When Permanent Page Count is selected, the following screen is
displayed.
Viewing and Resetting the Maintenance Page Count
The maintenance page counter is incremented when a page is
printed and incremented by two when a duplex sheet is printed. The
counter is used to track printer usage. When the counter reaches
250,000, a maintenance intervention and a status indicator appears
on the panel. The maintenance page count cannot be specifically
set using the operator panel. However, the count may be reset back
to zero which indicates a service person performed scheduled
maintenance on the printer.
If a user wants to view the current value of the maintenance page
counter, the user may select “Maint Cnt Value.” When the current
maintenance counter value is displayed, pressing Return causes
the printer to return to the previous menu. All other operator panel
keys are ignored. The following screen illustrates the current
maintenance counter value.
Perm Page Count
=1234567*
Maint Cnt Value
=1234567*